How To Support Heavy Shower Head

Adaptable Shower Head NOT Adaptable Plenty?

Hi, this is Justin Ball. The owner of HammerHead Showers. Practice you have an consequence with your adjustable shower head spraying the back of your shower wall instead of you?

Y'all may even be struggling with your rainfall shower head height non being adjustable plenty to get that true overhead rain shower feel.

Well, that'southward not uncommon. That'due south due to the limitations of the pivot balls in adjustable shower heads.

Let me tell y'all, there'south no need to get rid of your existing shower head. Avery simple solution to this problem is adding a shower head swivel ball adapter, like the one in the video to a higher place and article below.

It will increase the elevation and angle of your shower caput pivot ball, getting the water exactly where you desire it!

Increase Adaptable Shower Head Tiptop & Angle

This part easily attaches between your shower arm piping and your shower head, increasing the degree of the angle in your adjustable shower caput.

It not just works great for hand held shower heads, just specially rain shower heads.

Then, if you take a long shower arm coming out of the wall, only your rain shower head doesn't angle far plenty down to make information technology that true overhead result, this will get you that extra adjustability to really give y'all that true pelting shower head experience.

How To Install A Shower Head Swivel Brawl Adapter

This is our HammerHead Showers fitting which is made from solid brass. It comes in Chrome, Brushed Nickel, and Oil Rubbed Bronze.

We've also had information technology designed with an adjustable tightening ring so even if you lot're using extremely heavy shower heads, like our all-metal shower heads, you lot can tighten this ring downward to increase the tension in the pin ball, then it doesn't sag or droop.

How To Install The Shower Head Hinge Ball Adapter

I'll bear witness yous simply how piece of cake it is to install this hinge ball adapter and how much more adjustable your showerhead pivot ball volition be as a result.

We'll start with our standard shower head installation routine:

i) Remove the old shower head.

2) Clean the shower arm past removing whatsoever droppings and plumber'due south tape.

3) Reapply new thread seal tape.

4) Hand tightens the swivel ball adapter onto the shower arm threads.

5) Use a pair of soft grip pliers to requite it another extra turn.(Y'all can also apply an adjustable wrench but make sure to protect the plumbing equipment with a cloth so it doesn't get scratched.)

6) Apply some thread sealant tape to the male threads on the swivel brawl adapter.

seven)  Install your shower caput.

Time To Test For Leaks

Run some water through information technology and test for leaks.

Should you take any problems with the shower caput or hinge adapter leaking, yous'll want to uninstall information technology, reapply thread seal tape, and utilise pliers or a wrench to firmly tighten it down.

If all else fails, reach out to united states of america at contact@theshowerheadstore.com for boosted troubleshooting. We're here for you!

Solved! Fully Adjustable Shower Head Angle

You should immediately notice the big change in the adjustability or your shower caput peak. Whether you take a handheld showerhead or a rainfall shower head, yous should be able to become it to angle down almost overhead.

What's really important is that you fixed your result without getting rid of your existing shower head.

Thank you for checking united states out at HammerHead Showers. Nosotros promise you enjoy your newly adaptable shower head.

Store Now for our 100% METAL Shower Head Hinge Ball Adapter

Source: https://www.theshowerheadstore.com/blogs/news/increase-shower-head-angle-swivel-ball

Share this post